E-TES 240 E-TES 240 is used where a 220-240 volt dryer or range outlet is available. 3 and 4 prong adapter for dryer plugs included (additional adapters for range outlets available) 50' heavy duty cord with GFCI Maximum amp draw: 25.9 amps E-TES 120 E-TES 120 is used where two standard 110-120 volt circuits are available.  2 - 50' Heavy Duty Cords with GFCI Maximum amp draw: 14.6 amps (2 circuits required)		Common Specifications Safety Switches Include: Air Flow Switch Dual Hi-Limit Temperature Switch Safety Shutdown Temperature Switch Ground Fault Circuit Interrupter Weight: 39 lbs Height:  19-7/8" Length: 24" Width: 20-5/8" Heater Watt Rating: 240-6,200 watts; 120- 4,000 watts Warranty: 5 Year Housing, One Year Components
ETES Officially in Exactimate  Exatimate Code: WTR HTAM Covers E-TES unit for 24 hours with airmover Use the same code for both E-TES 240 or E-TES 120

	Part Number: MB1202 Product Name: E-TES Electric TES Unit (120 V)	Adds speed and versatility to traditional drying systems. Plugs into a 120-volt outlet and lets you use TES advanced drying technology as a supplement to traditional systems on large losses or as a stand alone drying system on small jobs. (air mover not included)	Price: $2195.00
	Part Number: MB2404 Product Name: E-TES Electric TES Unit (240 V)	Adds speed and versatility to traditional drying systems. Plugs into a 220-volt dryer or stove outlet and lets you use TES advanced drying technology as a supplement to traditional systems on large losses or as a stand alone drying system on small jobs. (air mover not included)	Price: $2395.00
	Part Number: MB230 Description: Exhaust Controller	Thermostat control gives you the ability to adjust your exhaust air flow according to the room temperature in your drying area. Easily programmable for on-off operation of two fans with set point temperatures up to 140°. Thermostat is used for 240 and 120 volt E-TES.	Price: $198.00
	Part Number: AC24A Description: OmniDry 33 Air Mover	Delivering up to 2,200 CFM while drawing only 3.9 amps, this 1/3-HP, 3-speed air mover is a workhorse — an outstanding air mover! The OmniDry 33 is perfect for use with your E-TES system!	Price: 194.95 4+ $185.12
	Part Number: AC512 Description: Octi-Dry Wall & Floor Drying Sytem	With the special Octi-Dry model designed for use with E-TES, you can accelerate this process even more by delivering hot air right to the wet materials for the fastest drying possible! (E-TES and air mover not included.)	Price: $349.00
	Part Number: NM4402 Description: Power cord w/ GFCI 10/3 x 50'	Female 6-30R, Male 10-30P (Standard equipment included with every E-TES 240)	Price: $233.00
	Part Number: NM4403 Description: 3 Prong Power Cord 10/3 x 50' (30 amp)	Female 6-30R, Male 6-30P	Price:  $154.00
	Part Number:  NM4407 Description: E-TES 120 Extension Cord 12/3 x 50' (15 amp - 120 Volt)	Female 5-15R, Male 5-15P	Price: $144.48
	Part Number: NM4420 Description: Adapter Cord, 3 Prong range plug, 50 amp	Female 10-30R, Male 10-50P (Standard Equipment 2 included with every E-TES 120)	Price: $166.00
	Part Number: NM4422 Description: Adaptor Cord, 4 Prong Dryer Plug	Female 10-30R, Male 14-30P (Standard equipment included with every E-TES 240)	Price: $168.00
	Part Number: NM4424 Description: 4 Prong Range Plug (30 amp)	Female 10-30R, Male 14-50P	Price: $170.00
	Part Number: AX33 Description: E-TES 120 Extension Cord 12/3 x 50' (20 amp)	Female 5-15R, Male 5-15P	Price: $48.50